To complete the receiver-ready Cybird P1, you will need all three items shown below, unless you already have some of them. This is a high-quality RC system, much better than the push-button controller offered previously. The new system gives you fully proportional control, and the SPF-5 combined receiver/ESC is much lighter than a separate receiver and ESC.

You will also need a charger for lithium-polymer batteries, available from your local hobby shop. (The transmitter charger cannot be used for the onboard battery.)

These replacement spare parts are for the Cybird P1 with 29 inch wingspan. If you have the larger, old version, see below. In consideration of other customers, please order only what you need. We reserve the right to limit quantities.

The "wing spars" are 3 mm fiberglass rods. They are not the same as the original parts, but they fit in the plastic socket of the wing post (remove the metal pin), and they might be useful for making your own replacement wings for the Cybird.

These parts are for the older Cybird "P2" with 39 inch wingspan. The AC adapter can be used as a 12 volt power supply for many battery chargers that require a 12 volt input. It is not used to charge batteries directly.